Diagnostics Tab

    The I-Mark diagnostics tab can be found in the left margin of the machine controller page. The diagnostics tab allows you to monitor I/O status, placeholder values, counter values as well as hardware and firmware revision levels. The diagnostics tab also contains function buttons allowing you to update the systems firmware & parameters as well as perform a hardware reboot.



I/O Status Display

The left hand column displays the I-Mark system Inputs. Each bit's status is displayed within the small check box located to the left of the I/O descriptor. A green check mark indicates the I/O bit as being High or in and On state. If the check box is empty this indicates the bit being in a Low or Off state.




Counters Status Display



  Registers Status Display