Components

There are (3) components included in all I-Mark marking systems.

 

  1. Marking head - had marking pin included

  2. Controller - Controls the motors in the marking heads

  3. I-Mark Windows Software - Is included in an integrated PC in the controller (Model 100 and Model 300 controllers have this feature), The software is also included on USB with the Quick Start Guide

 

All the necessary cables are provided with each system.

 

  1. Cat5 Crossover Cable - to connect between marking controller and customer supplied PC. Included with I or C series only.

  2. Cat5 Network Cable - to connect between marking controller and LAN (local area network). Included with I or C series only.

  3. Power Cable - to connect the I-Mark controller to any standard 120vac outlet (240vac by request).

  4. Marking cable - to connect between the marking head and the controller

  5. I/O Connector - optional with the model 200 or 300 controllers.

  6. Extended Cables - extended cables may be purchased. CMT only recommends the maximum length of 50ft for the cable distance between the marking head and the controller.

 

 

Please use the following links to get the details of each model:

M Series: Basic bench-top dot-peen marking stations

I Series Dot-Peen: Integration dot-peen units

I-Series Scribe: Integration scribe units

C Series Custom Solutions: large marking windows, steeper and servo motors, integrated Z-axis