Tomorrow's Marking Technology...Today.

Versatile marking system offering both Dot-Peen and "Silent Scribe" marking in the same
system. This ball screw drive system comes with either stepper drives offering up to 5
characters per second, or high speed servo drives offering up to 8 characters per second.
The system controller offers the flexibility of DC start and mark complete signals, as well as
serial and digital I/O communication. This system is UID/2D Square-Dot® Compatible.

Complete marking unit for integration:

• Custom C-Series Marking head
  
• Model 200 I-Mark Controller
  
• I-Mark software for programming
  
• Power cable, Marking head cable, Cross over cable, and LAN cable
  

The I-Mark-C Marking Head:

• Dot-Peen and scribe
  
• Air or electric pin control
  
• Selection of marking windows
  
• Marking speed selection: stepper motor – 5 characters per second, servo – 8 characters per second
  
• Ball screw drive
  
• Mountable in any orientation

The I-Mark Model 200 controller:

• Compact design for easy installation
  into production equipment.
  
• Communication options including
  remote programming over LAN, and
  operational controls via I/O,
  Modbus, Serial, Ethernet IP ect.
  
• Touch screen/monitor upgrade and
  more

Options:

• Pedestal mount
  
• Upgrades: database and camera
  integration

Utilities:

• Electrical components require 110 VAC power, 6 ft (1.8m) electrical cord supplied
  
• Air power required for pneumatic dot-peen (30-75 PSI)*
  
  • 8mm Push-in tube fitting

*Not a not requirement with electrically powered unit

Features:

• Ball screw drive, offers
  precise dot-peen and
  scribe accuracy
  
• Marks in dot-peen or
  scribe mode
  
  • Marking windows:
    60 = 1.6" x 2.3"
    
  • 150 = 4" x 6"
    
  • 300 = 8" x 12"
    
  • 500 = 10" x 20"
    
• Marking speed:
  
  • Stepper marks
    5 (1/8", 3mm)
    characters per
    second
    
  • Servo marks 8
    (1/8", 3mm)
    characters per
    second
    
• 10ft (3m) or 25 ft (7.6m)
  cable to connect
  marking head to
  controller
  
• Pin selections:
  
  • Carbide pin for
    peen – Marks
    plastic, wood
    and metals (up
    to 45 RC)
    
  • Diamond pin for
    scribe – marks
    harder parts and
    offers Square-
    Dot® (page 30)